Oil spill pad
Two-layer welded sorbent sheet — the workhorse of the line.
GreenStrength · oil absorbents
Oil spill kit — POK‑01
The first fifteen minutes of a spill, zipped into one bag. Pads, socks and personal protection staged where the risk is, so the response starts before the paperwork does.
Inside the bag
What is in the kit
POK‑01 as shipped — 5.5 US gallons of absorbency in one duffel bag. Tap an item to see what it is for.
- Waste bag ×1 — where the loaded sorbent goes when the job is done
- Keeps the used sorbent contained until it is disposed of
- Disposal follows your local regulations for hydrocarbon-contaminated waste
- Safety goggles ×1 pair — eye protection for the response
- Staged in the bag so nobody responds without it
- Part of the kit as shipped — no separate purchase
- Gloves ×1 pair — hand protection for handling loaded sorbent
- Staged in the bag so nobody responds without it
- Loaded pads and socks are handled, not swept
- Oil absorbent socks ×3 — stop the spill travelling
- Laid first — ring the spill, block the drain, then clean up inside the ring
- Our own sorbent filling in a flexible sleeve
- Same product as the POS‑03S‑04 sock — refills come from that part number
- Oil absorbent pads ×10 — take up what is pooled
- Oil-only meltblown pads, ultrasonically welded — same media as POM‑295‑18
- Absorbs up to 22× its weight in oil
- Refills come from the pad part number — restock the kit, do not replace it
- Duffel bag ×1 — the kit hangs where the risk is
- Heavy-duty duffel with a carry handle — grab it and go
- Whole kit 2.3 kg — one person carries it
- Total absorbency 5.5 US gallons of oil and fuel
Contents as supplied in POK‑01. Refills come from the pad and sock part numbers.
What it is
A kit is a decision made in advance. When something lets go, nobody wants to be walking to the stores for pads — the kit hangs on the wall by the risk, and the response is a matter of opening a bag.
Contents are the same GreenStrength media in the two formats a first response needs: three socks to stop it travelling, ten pads to take it up — plus the gloves, goggles and waste bag, so the whole job, including the disposal, is in the one bag. Total capacity is 5.5 US gallons of oil and fuel, and the packed kit weighs 2.3 kg.
Specification
| Part number | POK‑01 |
|---|---|
| Contents | 10 oil absorbent pads · 3 socks · 1 pair gloves · 1 pair goggles · 1 waste bag |
| Total absorbency | 5.5 US gallons of oil and fuel |
| Kit weight | 2.3 kg |
| Carrier | Heavy-duty duffel bag with carry handle — staged on a wall, in a vehicle or beside the risk |
| Media | 100% virgin polypropylene sorbent, oil-only |
| Typical use | Rapid response — industrial, automotive, marine |
Custom sizes and private-label packaging are available — the line is ours, so the format is yours.
Where it goes to work
- Plant floors and machine rooms
- Service trucks and fleet vehicles
- Boats, marinas and dock offices
- Fuel and oil transfer points
- Contractor and remediation crews
- Sites with a written spill-response plan
How to use it
- Stage the kit where the risk is, not where the storeroom is — response time is the whole point.
- On a spill: socks first to stop it spreading, then pads to take up what is pooled.
- Bag the used sorbent in the supplied waste bag.
- Restock the kit immediately — refills come from the same pad and sock part numbers.
Spec sheet
The POK‑01 specification sheet lives in the spec sheet library, alongside every other published sheet — ready to preview or download.
The rest of the line
Other GreenStrength products
One sorbent media, six formats. See the whole GreenStrength family.
Bench mat
The pad, sized to cover a workbench or service bay.
Oil spill sock
Flexible sorbent tube — containment around machines and drains.
Booms
The sock, built for water — floating containment.
Master rolls
Sorbent by the metre — cut to the run the job needs.
Stock the shelf before the spill.
Samples ship from Newmarket. Distributor and private-label enquiries welcome.