Oil spill pad
Two-layer welded sorbent sheet — the workhorse of the line.
GreenStrength · oil absorbents
Bench mat
The pad, sized for a workstation. An 18″ × 30″ sheet of the same oil-only polypropylene sorbent, sized to cover the bench during teardown and service work so the oil ends up in the mat instead of the floor drain.
Inside the mat
Layer by layer
Same construction as the pad, sized to a bench: two meltblown sorbent layers, ultrasonically welded. Tap a layer to see what it does.
- Ultrasonic weld pattern — bonds the two layers with no adhesive
- A bench-sized sheet takes more handling — the welds keep it in one piece saturated
- No adhesive — nothing to dissolve in oil, fuel or solvents
- Same weld pattern as the pad, run on the same line
- Meltblown sorbent layers ×2 — oleophilic capillaries drink oil, repel water
- Absorbs up to 22× its weight in oil — validated by a certified third-party lab
- Oil-only: picks up hydrocarbons, leaves the water behind
- 100% virgin polypropylene — consistent capillary structure
- 18″ × 30″ as standard; custom sizes cut to your bench
Laminated ultrasonically, no adhesive — and we cut custom sizes from the same media. How ultrasonic welding works · Ask for a size
What it is
Same media, bigger footprint. The bench mat covers the working area rather than chasing a single drip — you set the job down on it and everything that comes out of the assembly lands on sorbent.
It is the cheapest form of housekeeping in a service bay: oil that never reaches the floor never reaches the drain, the walkway or the inspection report.
Specification
| Size | 18″ × 30″ |
|---|---|
| Media | 100% virgin polypropylene meltblown |
| Absorbency | Up to 22× its own weight, oil-only |
| Behaviour | Oleophilic and hydrophobic — takes oil, repels water |
| Custom sizes | Available — the line is ours, so the format is yours |
Custom sizes and private-label packaging are available — the line is ours, so the format is yours.
Where it goes to work
- Workbenches and assembly stations
- Teardown and rebuild work
- Automotive and fleet service bays
- Pump, gearbox and hydraulic servicing
- Lab and test benches
- Under portable equipment
How to use it
- Lay the mat over the bench or bay floor before the work starts.
- Work over it — drips, wipes and drained fluid stay in the media.
- Replace when the mat is saturated or the job is finished.
- Dispose of the used sorbent in line with your local regulations for hydrocarbon-contaminated waste.
The rest of the line
Other GreenStrength products
One sorbent media, six formats. See the whole GreenStrength family.
Oil spill sock
Flexible sorbent tube — containment around machines and drains.
Booms
The sock, built for water — floating containment.
Master rolls
Sorbent by the metre — cut to the run the job needs.
Oil spill kit
Rapid response in one bag — pads, socks and protection.
Stock the shelf before the spill.
Samples ship from Newmarket. Distributor and private-label enquiries welcome.