Bench mat
The pad, sized to cover a workbench or service bay.
GreenStrength · oil absorbents
Oil spill pad — POM‑295‑18
The workhorse of the GreenStrength line. A two-layer meltblown polypropylene sheet, ultrasonically welded so it holds together saturated — it drinks oil and fuel and leaves water behind. Made in Newmarket, shipped across North America.
Inside the pad
Layer by layer
Two meltblown sorbent layers, ultrasonically welded — POM‑295‑18. Watch the construction assemble, then tap a layer to see what it does.
- Ultrasonic weld pattern — bonds the two layers with no adhesive
- Holds together fully saturated — lift a loaded pad without it tearing apart
- No adhesive — nothing to dissolve in oil, fuel or solvents
- Consistent weld pattern, pad after pad, on our own line
- Meltblown sorbent layers ×2 — oleophilic capillaries drink oil, repel water
- Absorbs up to 22× its weight in oil — validated by a certified third-party lab
- Oil-only: picks up hydrocarbons, leaves the water behind
- 100% virgin polypropylene — consistent capillary structure
- Two layers doubles the hold without doubling the handling
The layers are laminated ultrasonically — nothing to dissolve in oil or solvents — and we build custom laminations to your needs. Start a custom lamination
What it is
A pad is the format you reach for when the oil is already on the floor. Two layers of meltblown polypropylene sorbent are ultrasonically welded together — no adhesive, nothing to dissolve in oil, fuel or solvent — so a fully loaded pad lifts in one piece instead of tearing apart in your hand.
The fibre does the work. Meltblown polypropylene is oleophilic and hydrophobic: the capillary structure pulls hydrocarbons in and pushes water out, which is why the same pad works on a shop floor, under a leaking fitting, or floating on a puddle outdoors.
Specification
| Part number | POM‑295‑18 |
|---|---|
| Size | 18″ × 16″ |
| Packaging | 100 pads per box |
| Construction | Two sorbent layers, ultrasonically welded |
| Media | 100% virgin polypropylene meltblown |
| Absorbency | Up to 22× its own weight, oil-only |
| Behaviour | Oleophilic and hydrophobic — takes oil, repels water |
Custom sizes and private-label packaging are available — the line is ours, so the format is yours.
Where it goes to work
- Drip points under machines and presses
- Maintenance and teardown work
- Spot spills on the plant floor
- Fleet and automotive service bays
- Wipe-down of oily parts and tooling
- Spill-kit refills and restocks
How to use it
- Lay the pad over the spill or under the drip point — flat contact wicks fastest.
- Let it wick. The capillaries fill from the contact face outward; a saturated pad darkens and stops taking more.
- Lift and replace when saturated — the weld pattern holds the loaded pad together.
- Dispose of the used sorbent in line with your local regulations for hydrocarbon-contaminated waste.
Spec sheet
The rest of the line
Other GreenStrength products
One sorbent media, six formats. See the whole GreenStrength family.
Oil spill sock
Flexible sorbent tube — containment around machines and drains.
Booms
The sock, built for water — floating containment.
Master rolls
Sorbent by the metre — cut to the run the job needs.
Oil spill kit
Rapid response in one bag — pads, socks and protection.
Stock the shelf before the spill.
Samples ship from Newmarket. Distributor and private-label enquiries welcome.